| Frame Size (mm) |
60x60 |
| Gear/Shaft Type of Gear Reducer |
Round Shaft |
| Output Power (W) |
6 |
| Voltage (V) |
Single Phase 115V |
| Frequency (Hz) |
60 |
| Current (A) |
0.27 |
| Capacitor (μF) |
2.5 |
| Insulation Resistance |
100MΩ or more when DC500V is applied between the windings and the frame after rated motor operation under normal ambient temperature and moisture. |
| Dielectric Strength |
Sufficient to withstand 1.5kV at 60Hz applied between the windings and the frame for one minute after rated motor operation under normal ambient temperature and moisture. |
| Temperature Rise |
Temperature rise of windings are 80°C or less measured by the resistance method after rated motor operation with connection to gear reducer or equivalent heat radiation plate. |
| Insulation Class |
Class B (130°C) |
| Ambient Temperature |
-10°C~+50°C |
| Ambient Moisture |
< 85%R.H. (noncondensing) |
| Ratio |
30 |
| Direction |
Opposite direction as the motor shaft |
| Final Speed Range (rpm) |
3-53 |
| Torque |
90 rpm (kgcm) |
6.6 |
| 1200 rpm (kgcm) |
11 |
| Permissible Overhung Load |
10mm from shaft end (kg) |
12 |
| 20mm from shaft end (kg) |
18 |
| Permissible Thrust Load (kg) |
4 |
* The range of speed adjustment indicated is under load-free.
