HOME > Product Category > AC Motor with Gear Reducer > 11117

AC Motor 11117 with Gear Reducer

Specification

Frame Size (mm)
90x90
Gear/Shaft Type of Gear Reducer
Spline Shaft, 4x4mm
Output Power (W)
40
Voltage (V)
Single Phase 230V
Frequency (Hz)
50 / 60
Current (A)
0.55
Capacitor (μF)
2.3
Insulation Resistance
100MΩ or more when DC500V is applied between the windings and the frame after rated motor operation under normal ambient temperature and moisture.
Dielectric Strength
Sufficient to withstand 1.5kV at 60Hz applied between the windings and the frame for one minute after rated motor operation under normal ambient temperature and moisture.
Temperature Rise
Temperature rise of windings are 80°C or less measured by the resistance method after rated motor operation with connection to gear reducer or equivalent heat radiation plate.
Insulation Class
Class B (130°C)
Ambient Temperature
-10°C~+50°C
Ambient Moisture
< 85%R.H. (noncondensing)
Ratio
30
Direction
Opposite direction as the motor shaft
Final Speed Range (rpm)
3-46 / 3-53
Torque 90 rpm (kgcm)
15
1200 rpm (kgcm)
57
Permissible Overhung Load 10mm from shaft end (kg)
30
20mm from shaft end (kg)
45
Permissible Thrust Load (kg)
15
* The range of speed adjustment indicated is under load-free.

Description

  • Various types and ratios of motor with gearhead combination available.
  • Most of these units are compatible with others which are commonly used in the industry.
  • Output power from 6W to 120W. Low noise, high efficiency gearhead with closed lubrication design, maintenance-free.
  • Variable speed range of motor : 90 - 1400rpm(50Hz), 90 - 1600rpm(60Hz). Speed of motor and gearhead combination depends on the gear ratio applied.

AC Motor with Gear Reducer Dimensions 11117