|
|
|
|
> > > |
|
 |
Specification
| Power |
Single Phase AC85V~265V, 50/60Hz |
| Drive Current |
1.5A~6.0A (16 Multi-step Current Control) |
| Resolution |
Full Step (1.8°/s,200s/r)
Half Step (0.9°/s,400s/r) |
| Control Mode |
Single-Pulse(1P), Two-Pulse(2P) |
| Auto-current-down |
30~70% (16 Multi-step Current Control) |
| Max. Pulse Speed |
60K Hz |
| Pulse Width |
5us(Min) |
| Direction Response |
10us(Min) |
| Input Signal |
+4~+10V, <20mA |
| Input Signal Impedance |
220Ω |
| Output Signal |
Open Collector, 24V, 10mA(Max) |
| Noise Isolation |
Use of Photo Coupler |
| Connection Method |
Removable Connector |
| Ambient Temperature |
0°C~+40°C |
| Ambient Moisture |
<85%RH |
| Dimension (LxWxH) |
207x107x69mm |
| Weight |
1180g |
Description
- AC 85V~265V Power Input, suitable for high-speed high torque applications.
- Can specify driving current, reaching highest reading of 6.0A per phase.
- Excitation mode can be selected from Full-Step (1.8°/step) or Half-Step (0.9°/step).
- Provide two methods of Pulse Input: Single-Pulse (1P), and Two-Pulse (2P).
- Can adjust Running current and Stop current for optimal motor revolving performance.
- Overheating Protection and Output to ensure product safety.(optional)
- AUTO-CURRENT-DOWN function for reduced motor heat.
- Step zero output, and Motor Current Off (COF) functions, can be used for external control.
- Self-Testing Function.
- High speed CPLD component design, enhances stability of product.
- Drive current using Soft-up method to prevent sudden burn-out of driver.
- LED displays revolving status.
- Input and output both use Photo Coupler to provide noise isolation.
- Special design of large aluminum alloy extrusion heat sink body.
|
|
|
|
| |
|
|
